ZSK32-40車方機設備特點:
1.適應中小型零件銑外方,二、四、六、八方等。
2.采用數控系統,可實現曲面、臺階面、孤性面、錐面加工。
3.運作模式手動,半自動可選;可加裝送料裝置,實現全自動化生產,節省人力。
4.改變傳統銑方加工工藝,可提高2- 5倍效益,且產品表面光潔度高。
1. Adapt to milling of small and medium- sized parts outside, two, tour, six, eight, etc.
2. Using a numerical control system, it can reilze the processing of curved surfaces,
stepped surfaces, solitary surfaces and conical surfaces.
3. The operatlion mode Is manual and seml- -automatic optonal; feeding devlce can
be added to realize fully automated production and save manpower.
4. Changing the traditional milling processing technology can increase the eficiency
by 2-5 times, and the surface finish of the product is high.
設備參數:
最大工件切削直徑Max.utting Diameterof workpiece | 60mm | 鐵方產品表面光潔度The roughness of product surface | 1.6 -3.2μm |
車方有效行程Efective travel o polygon | 80mm | 正常工作油泵壓力Normnal working oil pump pressure | 20-40mpa |
主軸通孔直徑Spingle hole diameter | φ48mm | X/Y軸伺服電機XY aixs servo motor | 4N.m/4N.m |
拉管通孔直徑Drawn pipe hole diam | 040mm | 控制器變壓器Controllr transformer | 1.5kw |
主電機功率Main motor power | 2.2kw-6 | 機床變壓器Machine tool transformer | 150w |
變頻器Inverter | 3.7kw | 外部電源Extemal power supply | 380v/3ph/50hz |
主軸轉速范圍Spindle speed range | 100-1200rpm | 機床尺寸Machine outside dimensions | 1500*1020*1640mm |
車方對邊公差polygon tolerance of opposite side | 0.05mm | 機床凈重Machine net weight | 900KG |
車方長度公差polygon length tolerance | 0.08mm |
|
|