ZSK0640銑六方機床 設備性能:
1.適應中小型零件銑外方,二.四.六.八方等。
2采用數控系統??蓪?shí)現曲面,臺階面,孤性面,鏡面加工。
3.組作模式平動。半自動可選:可加裝送料裝置,實現全自動化生產。節省人力。
4.改變傳統銑方加工工藝,可提高2-5值效益,產品表面光法度高。
1. Adapl to mling o smal and medun-ized parts cutside, two, tour,ight. t
2 Uaing a Pumerncal control ysterm, can reakze he processing of cuved Burtacer.
stepped surfacer soditary surtacos and conical surfaces
3. Tihe operation mode manual and sem-automatie optionat, leding device can be
adbedo roalze Mly autonated production and MWe marpone.
4. Changing he Tadtonal miling processing Mechnokogy can increase the eficieney by
2-5 Bmes, and the urtace fniah o he producd m high
銑六角車床參數:
工件車方直徑Dameter of worspiece car | 10-100mm | 銑方產品表面光潔度The roughness af producd surtace | 1.6-3.2um |
車方行程Car side rp | 160mm | 正常工作油泵壓力Nomal worting oll pump prossure | 20-40pa |
主軸通孔直徑Spinge hole dameter | φ48mm | X/Y軸伺服電機XY aies servo motor | 6N.m6N.m |
控管通孔直徑Drawn pipe hole dam | φ40mm | 控制器變壓器Contoler Tansomer | 1.5kW |
主電機功率Main motor power | 3kw-6 | 機床變壓器Machine tool ranstormaer | 150w |
安頻器Inverter | 5.5kw | 外部電源Exernal poner uppy | 380vph50hz |
主軸轉速范圍Spinde speed nange | 100-1200pm | 機床尺寸Machine outside aimensions | 1880^1260-1620mm |
車方對邊公量polygon olerance of oppoite side | 100-1200pm | 機床凈重Machine net weight | 1300KG |
車方長度公差polygon length tolerance | 100-1200pm | | |